Save the current 2D layout to a .json file (plain text), and load it back
later to keep editing. Shares a design with someone else, too.
click a placed module to select it, then drag to move.
size 5.0 mm
Text is engraved on the top cover in the tiles next to the chosen edge — no
module can be placed there.
Reshape box: click empty cells to hug, notch, or bridge
modules into one box.
Both are required. Place power slots for
the cable and latches around the box to hold the covers
shut — keep them on separate walls.
Click a wall to add a dovetail or a
cable opening. Put the male rail on one box and the
female groove at the mirror position on the other, then slide the boxes together top-down.
A female fills its tile (no module there) — add an empty cell with Reshape box if no wall
tile is free. Keep joins off the power/latch walls. You design each box separately and match the
positions yourself.
Both covers are separate bodies in the file — in your slicer use “Split to
objects/parts” to print or colour them independently, or grab each cover on its own above.
Each cell = 10 mm. On each module: ○ = M2.5
hole (holding column), → = JST socket & plug-in direction,
→ = USB-C. The arrow points the way the plug goes in — plan
your cable routing around it. Step 1 of 3: placement.